These two input ThermaData® thermocouple data loggers are housed in a water resistant, ergonomic case that is designed to meet IP66/67 protection. Four models are available, either blind or with LCD display and with the option of a type K or T thermocouple input.
The Thermocouple ThermaData®data loggers measure temperature over the range of -100 to 1372 °C with a 0.1 °C resolution, auto-ranging to 1 °C over the range of 301 to 1372 °C. At programmable intervals the loggers will record the temperature, up to a maximum of 16000 readings or 2 x 8000 readings.
Each logger incorporates a red and green LED, the flashing green LED indicates that the logger is active/logging and the flashing red LED indicates that your customised pre-set alarms have been exceeded. Each logger is supplied with a USB lead and ThermaData® Studio Software.
Please note Thermocouple loggers are sold excluding probe.
To add recommended probes and other accessories select your choices from the 'Add Accessories' dropdowns, then click 'Buy Now! button. Please ensure you select the relevant probe type K or T to match product you are purchasing.
For details of the widest range of thermocouple probes available Click Here!
ThermaData Studio software
The ThermaData logger is connected to a PC via a serial or USB port lead. By selecting the relevant icon the data can be downloaded and displayed either as a graph, table or summary. The information can then be analysed by zooming in, saving as a 'studio file' or exporting to other software packages.
USB Connection Point
Simply remove the end cap to access the USB port. This allows the user to connect the logger to a PC via the USB lead (supplied) and upload the temperature readings collected.
|range - K thermocouple:||-100 to 1372°C|
|range - T thermocouple:||-100 to 400°C|
|operating range:||-20 to +50 °C|
|resolution:||0.1 °C to 300 °C thereafter 1 °C|
|memory:||16000 or 2 x 8000 readings|
|sample rate:||0.1 to 255 minutes|
|battery:||AA Tadiran - Li-SOCl|
|battery life:||maximum 3 years @ 20 °C|
|sensor type:||K or T thermocouple|
|dimensions:||34 x 66 x 109 mm|
|case material:||ABS plastic with Biomaster anti-bacterial additive|
|country of manufacture:||United Kingdom|
|water/dust resistance:||IP65 protection|
|conforms to standard:||EN 13485|
ThermaData Studio v4.0.1 (Main Desktop Download for Windows 7,8 & 10)
New release adds:
Windows Installation Instructions:
1) Please unzip the folder by right-clicking on the folder and pressing 'Extract All'
2) Once the folder has been extracted select the 'setup.exe' file
3) Run through the setup wizard by clicking 'Next'
4) Once the installation has complete, select the ThermaData Studio icon on your desktop
5) A splash screen will open along with a window requesting you select the instruments that you would like to enable. Untick all the instruments you do not have, leaving only the instruments you have purchased ticked. Click 'Ok'
6) Once this has been completed ThermaData Studio will open ready for you to use.
If you require any information on how to use ThermaData Studio, please click on the blue '?' icon in the top right corner
and this will open a .pdf help guide. Alternatively, contact us on 01903 202151 or email email@example.com
ThermaData Studio v4.0.1 (Windows 10 App download)
Both powerful and sophisticated, yet user-friendly, the ThermaData Studio software enables temperature data to be organised and analysed to provide management information.
The ThermaData Studio software has the ability to display up to 32 traces on a graph, the trace colours are user selectable. All files can be viewed as thumbnail icons for easy identification.
The software allows the user to programme the logging sample/interval rate (0.1 to 330 minutes), communication interval (sync) with PC, real-time clock, °C or °F and a manual start option. It is also possible to include a user ID for each logger.
The ThermaData Studio software is supplied as a FREE download. Please note: when initially ordering non WiFi loggers, it is necessary to order at least one ThermaData logger cradle.
ThermaData WiFi loggers Use the unique ID of each logger to create a secure connection between the logger and ThermaData Studio software, that can be accessed and viewed anytime and anywhere with an internet connection. Each logger communicates directly to the WiFi router at set intervals to push data through the internet into ThermaData Studio. The information is available to be analysed and exported into a report format.
For a walk-through guide to setting up ThermaData Studio software please click here.
ThermaData WiFi Firmware (Latest) For all instruments before D19350562 (Click link to download)
This includes version 1.2.4 of the firmware which:
You can view the current readings, settings and reference information of all your thermometers. Warning indicators will appear if there is a problem with any instrument, or if any sensor reading has reached the alarm levels set in ThermaData Studio.
For each thermometer, you can opt to receive push notifications when an alarm condition has been detected.
TD Link is a view-only app, that cannot be used to alter instrument settings.
This app couples with the ThermaData Studio app, to enable the user to receive alerts from their ThermaData WiFi wireless thermometers on their phones and tablets..
Biomaster antimicrobial technology is incorporated in the majority ETI products during the manufacturing process, reducing the risk of bacterial cross contamination. As well as being harmful to health, outbreaks of food poisoning can damage brands, and the reputation of stores, food producers and restaurants. This protection lasts for the useful lifetime of the product.
The risk of food-borne contamination is widespread, existing in restaurants, bars, hotels, supermarkets, hospitals, schools, aircraft, cruise ships and your home. Anywhere where food is made, prepared or eaten.
Biomaster treated products have been proven to reduce the growth of food borne bacteria such as E.Coli, Salmonella and Campylobacter by up to 99.99%, so by choosing an ETI product with Biomaster additive, your product is protected 24 hours a day, every day.
Biomaster is the leading brand of Antimicrobial Technology providing safe, effective and long-lasting protection against the growth of harmful bacteria, making any surface cleaner and more hygienic for its entire lifetime.
Proven to quickly reduce bacteria by up to 99.99% Biomaster is an effective means of reducing the growth of MRSA, E.Coli, Salmonella Campylobacter and Legionella and over 50 other species.
Incorporated into the body material of your ETI product, Biomaster becomes an integral part of it, providing durable, lifelong protection against the threat of cross contamination.
The active ingredient in Biomaster is silver. Silver has been used in its pure form for many centuries to prevent the growth of bacteria.
Incredibly durable, long lasting and highly active, when Biomaster is added during manufacture it is dispersed throughout the product casing, will not wash off and will last for its entire lifetime. Biomaster provides antimicrobial protection without allowing bacteria to develop resistance.
High temperature Thermocouple ThermaData logger Type K QuickStart instructionsDownload (408.04k)
High temperature Thermocouple ThermaData logger Type T QuickStart instructionsDownload (361.79k)