There are no more items in your cart
Thermapen® Classic — Strong Probe
The Thermapen Classic strong penetration probe thermometer provides the same benefits as the Thermapen Classic thermometer, but comes with a general purpose strong temperature probe, rather than the reduced tip. It is ideal for insertion into both solids and liquids
- Over 50% faster than traditional probes
- Reaches temperature in just 3 seconds
- Lightweight and easy-to-use
- Free traceable calibration certificate
- Polygiene BioMaster product protection
- Meets the European Standard EN 13485
- °C to °F switchable
- 1.0° or 0.1° switchable resolution
- Free protective Pouch included (830-001)
The Thermapen Classic is an instant-read thermometer designed to make temperature readings for food safety and HACCP compliance quick and easy
The Thermapen Classic penetration probe thermometer incorporates a large digital display with a precise read-out over the range of -49.9 to 299.9 °C with a 0.1 °C resolution. The resolution can be switched to 1 °C, if required, via a switch in the battery compartment. The thermometer will power off automatically after ten minutes, maximising battery life. This feature can be disabled if not required. Both low battery (icon) and open circuit indication are also displayed, when applicable. Each Thermapen® is powered by two lithium coin cell batteries with a minimum life expectancy of 1500 hours.
The thermometer probe, conveniently folds back through 180 degrees into the side of the instrument when not in use. The casing is washable and includes Polygiene BioMaster product protection that reduces bacteria growth and the ergonomic rubber seal minimises the risk of the ingress of water, dust or food.
Thermapen® is a registered trademark in the UK (2025607), EU (008449571) and the USA (3898535). It is also protected by EC Regd.Des.No. 001580473.
231-210
Data sheet
| Range: | -49.9 to 299.9 °C |
|---|---|
| Operating Range: | -20 to +50 °C |
| Resolution: | 0.1 °C or 1 °C - user selectable |
| Accuracy: | ±0.4 °C (-49.9 to 149.9 °C) otherwise ±1 % |
| Battery: | 2 x 3 volt CR2032 lithium coin cell |
| Battery Life: | 1500 hours |
| Sensor Type: | K- Termocouple |
| Display: | 14.5mm LCD |
| Dimensions: | 19 x 47 x 153mm |
| Weight: | 97 grams |
| Case Material: | ABS plastic includes Biomaster product protection |
| Country of Manufacture: | United Kingdom |
| Guarantee: | two years |
| Measurement Scale: | Celsius/Fahrenheit |
| Certification: | FREE traceable calibration certificate |
| Conforms to Standard: | EN 13485 |
Reviews (1)
Does the job perfectly
Report an abuse
Does the job perfectly
By Jonathan S. on 27/06/2023