Thermapen Surface with Surface Probe
Thermapen Surface is the Thermapen Classic with a surface temperature probe
- Ideal for grills, griddles, hotplates, pipe temperatures etc
- Temperature range -49.9 to 299.9 °C
- Lightweight, compact & easy to use
- Foldaway stainless steel probe
- Probe dimensions 8mm diameter x 95mm
- Polygiene Biomaster Product Protection
- 2 year guarantee
The Thermapen Classic Surface industrial thermometer has all the benefits of the Thermapen Classic coupled to a ribbon surface probe and is particularly useful in determining the temperature of hot plates or pipe temperatures etc*.
This Thermapen Classic Industrial thermometer incorporates a large digital display with a precise read-out over the range of -49.9 to 299.9 °C with a 0.1 °C resolution. The resolution can be switched to 1 °C, if required, via a switch in the battery compartment. The thermometer will power off automatically after ten minutes, maximising battery life. This feature can be disabled if not required. Both low battery (icon) and open circuit indication are also displayed, when applicable. Each Thermapen is powered by two lithium coin cell batteries with a minimum life expectancy of 1500 hours.
The thermometer probe, conveniently folds back through 180 degrees into the side of the instrument when not in use. The casing is washable and includes 'Polygiene Biomaster' additive that reduces bacteria growth and the ergonomic rubber seal minimises the risk of the ingress of water, dust or food.
Thermapen is a registered trademark in the UK (2025607), EU (008449571) and the USA (3898535). It is also protected by EC Regd.Des.No. 001580473.
* Please note, with the ribbon surface probe Thermapen the accuracy and speed of response will be dependant on whether the surface is flat and heat transfer compound is used
|Range:||-49.9 to 299.9 °C|
|Operating Range:||-20 to +50 °C|
|Resolution:||0.1 °C or 1 °C - user selectable|
|Accuracy:||±0.4 °C (-49.9 to 149.9 °C) otherwise ±1 %|
|Battery:||2 x 3 volt CR2032 lithium coin cell|
|Battery Life:||1500 hours|
|Sensor Type:||K thermocouple|
|Dimensions:||19 x 47 x 153mm|
|Case Material:||ABS plastic includes Biomaster product protection|
|Country of Manufacture:||United Kingdom|
|Certification:||FREE traceable calibration certificate|
|Conforms to Standard:||EN 13485|