Thermapen Air - Thermapen with Air Probe for HVAC
Thermapen Air, thermometer with air temperature probe
- Ideal for HVAC applications
- One-handed operation
- Auto-power on/off facility
- Foldaway stainless steel probe
- Lightweight, compact and easy to use
- Polygiene BioMaster product protection
- 2-year guarantee
The Thermapen Air industrial thermometer with fast response air probe is an invaluable tool in establishing the correct air temperature quickly in HVAC, laboratory applications and other temperature sensitive working areas.
The Thermapen Air thermometer incorporates a large digital display with a precise read-out over the range of -49.9 to 299.9 °C with a 0.1 °C resolution. The resolution can be switched to 1 °C, if required, via a switch in the battery compartment. The thermometer will power off automatically after ten minutes, maximising battery life. This feature can be disabled if not required. Both low battery (icon) and open circuit indication are also displayed, when applicable. Each Thermapen is powered by two lithium coin cell batteries with a minimum life expectancy of 1500 hours.
The thermometer probe, conveniently folds back through 180 degrees into the side of the instrument when not in use. The casing is washable and includes 'Biomaster' additive that reduces bacteria growth and the ergonomic rubber seal minimises the risk of the ingress of water, dust or food.
Thermapen is a registered trademark in the UK (2025607), EU (008449571) and the USA (3898535). It is also protected by EC Regd.Des.No. 001580473.
|Range:||-49.9 to 299.9 °C|
|Operating Range:||-20 to +50 °C|
|Resolution:||0.1 °C or 1 °C - user selectable|
|Accuracy:||±0.4 °C (-49.9 to 149.9 °C) otherwise ±1 %|
|Battery:||2 x 3 volt CR2032 lithium coin cell|
|Battery Life:||1500 hours|
|Sensor Type:||K thermocouple|
|Dimensions:||19 x 47 x 153mm|
|Case Material:||ABS plastic includes Biomaster product protection|
|Country of Manufacture:||United Kingdom|
|Certification:||FREE traceable calibration certificate|
|Probe Diameter:||3.3 mm|
|Probe Length:||95 mm|
|Conforms to Standard:||EN 13485|