6100 & 6102 Series Therma-Hygrometers with Interchangeable Probes

The 6100 & 6102 therma-hygrometers are easy-to-use hygrometers, or relative humidity and air temperature measuring meters. The units measure %rh over the range of 0 to 100%rh with a resolution of 0.1 %rh and temperature over the range of -20 to 70°C with a resolution of 0.1°C/°F.

These humidity meters incorporate a clear custom LCD with °C, %rh, max/min, hold and dew point indication. There is an automatic display of both open circuit and low battery. The 6100 displays the temperature and humidity at the push of a button separately, whereas the 6102 displays humidity and temperature simultaneously and additionally incorporates a backlit display.

The units are powered by three 1.5 volt AAA batteries with a minimum life expectancy of up to 10000 hours. An auto power-off facility turns the therma-hygrometer off automatically after ten minutes, maximising battery life.

The 6100/6102 therma-hygrometers utilise an interchangeable probe that incorporates a one-metre lead with a 6-pin Lumberg connector.

An optional 3-point (25, 50 & 75 %rh) UKAS Humidity Calibration Certificate is available at a preferential price when purchased with these therma-hygrometers. Select this option from drop-down.

To add recommended probes and other accessories select your choices from the 'Add Accessories' dropdowns, then click the 'Buy Now! button.

ATTENTION HUMIDITY SENSOR

The Humidity Sensors housed in these products are susceptible to contamination from pollutants such as solvents and exposure to saturated air and therefore are not covered under the 2-year warranty.
Furthermore, it is expected that the sensor’s readings will drift by up to 0.5% per year.