No products
Prices exclude VAT. Delivery options calculated at checkout
These new ThermaData WiFi HTD humidity loggers measure and record both temperature and relative humidity (%rh) over the range of 0 to 50 °C and 0 to 100 %rh. At programmable intervals, the loggers will record simultaneously both temperature and humidity, recording up to a maximum of 18000 readings (9000 humidity and 9000 temperature).
The logger incorporates a large LCD that displays temperature and humidity from the internal sensors.
Each ThermaData WiFi humidity logger incorporates two LED's, a flashing green LED indicates that the logger is active/logging and a flashing red LED indicates that your customised preset alarms have been exceeded.
The humidity and temperature ThermaData WiFi loggers are suitable for a diverse range of applications which include HVAC climate monitoring, QA monitoring of storage areas etc.
ThermaData Studio Software:
The ThermaData Studio software has the ability to display up to 32 traces on a graph, the trace colours are user selectable. All files can be viewed as thumbnail icons for easy identification.
The software allows the user to programme the logging sample/interval rate (0.1 to 330 minutes), communication interval (sync) with PC, real-time clock, °C or °F and a manual start option. It is also possible to include a user ID for each logger.
range - temperature: | 0 to 50 °C |
range - humidity: | 0 to 100 %rh |
resolution - humidity: | 0.1 %rh |
accuracy - temperature: | ±0.5 °C (0 to 50 °C) |
accuracy - humidity: | ±2 %rh @ 25 °C (20 to 80 %rh) ±3 %rh @ 25 °C (10 to 90 %rh) ±4 %rh @ 25 °C (0 to 100 %rh) |
hysteresis - humidity: | ±1 %rh |
memory: | 2 x 9000 readings |
sample rate: | 6 seconds to 330 minutes |
battery: | 2 x 1.5 volt AA |
battery life: | approx. 10 months @ 20 °C |
sensor type: | Temperature: Thermistor Humidity: Capacitance polymer |
display: | 12 mm LCD/2 LED's |
dimensions: | 29 x 72.5 x 96 mm |
weight: | 165 grams |
ThermaData Studio v4.0.1 (Main Desktop Download for Windows 7,8 & 10)
New release adds:
Windows Installation Instructions:
1) Please unzip the folder by right-clicking on the folder and pressing 'Extract All'
2) Once the folder has been extracted select the 'setup.exe' file
3) Run through the setup wizard by clicking 'Next'
4) Once the installation has complete, select the ThermaData Studio icon on your desktop
5) A splash screen will open along with a window requesting you select the instruments that you would like to enable. Untick all the instruments you do not have, leaving only the instruments you have purchased ticked. Click 'Ok'
6) Once this has been completed ThermaData Studio will open ready for you to use.
If you require any information on how to use ThermaData Studio, please click on the blue '?' icon in the top right corner
and this will open a .pdf help guide. Alternatively, contact us on 01903 202151 or email technical@etiltd.co.uk
ThermaData Studio v4.0.1 (Windows 10 App download)
Both powerful and sophisticated, yet user-friendly, the ThermaData Studio software enables temperature data to be organised and analysed to provide management information.
The ThermaData Studio software has the ability to display up to 32 traces on a graph, the trace colours are user selectable. All files can be viewed as thumbnail icons for easy identification.
The software allows the user to programme the logging sample/interval rate (0.1 to 330 minutes), communication interval (sync) with PC, real-time clock, °C or °F and a manual start option. It is also possible to include a user ID for each logger.
The ThermaData Studio software is supplied as a FREE download. Please note: when initially ordering non WiFi loggers, it is necessary to order at least one ThermaData logger cradle.
ThermaData WiFi loggers Use the unique ID of each logger to create a secure connection between the logger and ThermaData Studio software, that can be accessed and viewed anytime and anywhere with an internet connection. Each logger communicates directly to the WiFi router at set intervals to push data through the internet into ThermaData Studio. The information is available to be analysed and exported into a report format.
For a walk-through guide to setting up ThermaData Studio software please click here.
ThermaData WiFi Firmware (Latest) For all instruments before D19350562 (Click link to download)
This includes version 1.2.4 of the firmware which:
By signing in to the TD Link app, you can view the status of all the ThermaData wireless thermometer units associated with ThermaData Studio, wherever the internet is available.
You can view the current readings, settings and reference information of all your thermometers. Warning indicators will appear if there is a problem with any instrument, or if any sensor reading has reached the alarm levels set in ThermaData Studio.
For each thermometer, you can opt to receive push notifications when an alarm condition has been detected.
TD Link is a view-only app, that cannot be used to alter instrument settings.
This app couples with the ThermaData Studio app, to enable the user to receive alerts from their ThermaData WiFi wireless thermometers on their phones and tablets..
Thermometers, hygrometers & analytical instruments from the UK's largest thermometer manufacturer.
Easting Close, Worthing, Sussex, BN14 8HQ
+44 (0)1903 202151
sales @etiltd.com
This website is GDPR compliant and uses cookies to Click 'I agree' to accept these terms and close this banner. For info on our GDPR & Privacy policy, click here! |
I agree |
ETI retains the design and manufacturing copyrights for all goods. ETI owns full copyright in respect of all content, text and images in or on its catalogues, websites and emails and their reproduction in part or in whole is prohibited without ETI's prior written consent. You may also wish to visit our other websites: thermapen.co.uk and home-thermometers.co.uk
![]() |
![]() |
READ REVIEWS |