Stainless Steel Pro ThermaData data-loggers that are ideal for food, pharmaceutical and other applications where a high temperature data-logger is required. The Stainless steel ThermaData® logger is housed in a waterproof, food grade 316 stainless steel case to protect the logger from corrosion, impact and moisture (IP66/67).
The ThermaData® logger software allows the user to programme the logging sample/interval rate (1 to 255 minutes), the real-time clock, °C/°F, delayed start (maximum 23 hours, 59 minutes) and a 12-character user ID. The software also incorporates a password protected calibration adjustment feature that allows the user to check the calibration of loggers and make minor adjustments 0.5 °C (±3 °C).
The ThermaData Studio software allows the user to programme the logging sample/interval rate (1 second to 255 minutes), the real-time clock, °C/°F, delayed start (maximum 23 hours, 59 minutes), software start, temperature start or time start and a 31-character user ID. The user can also set high and low alarm values for a specific application.
The Stainless Steel Pro is available in six options;
In addition to the five standard options there is also a Ø1.8 x 20 mm fast response probe variant which is ideal for applications which require a fast ambient reading ie. Dishwashers. Each logger is supplied with a one metre USB-C lead.
ThermaData® Studio PC software
The ThermaData Studio software is supplied as a FREE download. The Stainless Steel Pro logger is connected to a PC via a USB-C port lead and by selecting the relevant icon the data can be downloaded and displayed either as a graph, table or summary. The information can then be analysed by zooming in, saving as a Studio File or exporting to other software packages. The Stainless Steel Pro logger produces a report automatically on computer plug-in, this report will detail high and low alarms and also give you various key information for acceptance for deliveries or processes. No software required to download PDF report.
USB Connection Point:- Simply unscrew the end cap to access the USB-C connector and attach the supplied USB-C lead. This allows the user to connect the logger to a PC and upload any data collected.
|range:||-20 to 125 °C|
|sample rate:||1 to 255 minutes|
|battery:||3.6 volt 2/3 AA Lithium|
|battery life:||3 years minimum|
|dimensions:||22.5 x 129mm (exc probe)|
|weight:||170 grams nominal - model dependent|
|case material:||stainless steel|
|country of manufacture:||United Kingdom|
|water/dust resistance:||IP66/67 protection|
ThermaData Studio v5.0.0 (Main Desktop Download for Windows 7,8 & 10)
New release adds:
Windows Installation Instructions:
1) Select the 'setup.exe' file and run through the setup wizard by clicking 'Next'
2) Once the installation has complete, select the ThermaData Studio icon on your desktop
3) A splash screen will open along with a window requesting you select the instruments that you would like to enable. Untick all the instruments you do not have, leaving only the instruments you have purchased ticked. Click 'Ok' to proceed
4) ) Once this has been completed ThermaData Studio will open ready for you to use.
ThermaData Studio v5.0.0 (Windows 10 App download)
Both powerful and sophisticated, yet user-friendly, the ThermaData Studio software enables temperature data to be organised and analysed to provide management information.
The ThermaData Studio software has the ability to display up to 32 traces on a graph, the trace colours are user selectable. All files can be viewed as thumbnail icons for easy identification.
The software allows the user to programme the logging sample/interval rate (0.1 to 330 minutes), communication interval (sync) with PC, real-time clock, °C or °F and a manual start option. It is also possible to include a user ID for each logger.
The ThermaData Studio software is supplied as a FREE download. Please note: when initially ordering non WiFi loggers, it is necessary to order at least one suitable communications cable.
ThermaData WiFi loggers Use the unique ID of each logger to create a secure connection between the logger and ThermaData Studio software, that can be accessed and viewed anytime and anywhere with an internet connection. Each logger communicates directly to the WiFi router at set intervals to push data through the internet into ThermaData Studio. The information is available to be analysed and exported into a report format.
For a walk-through guide to setting up ThermaData WiFi loggers please click here.
If you require any information on how to use ThermaData Studio, please click here to download our help guide, or please click on the blue ‘?’ icon in the top right corner of ThermaData Studio.
Alternatively, contact us on 01903 202151 or email email@example.com. Quick start guides for each of our data loggers can be download from their relevant website page.
ThermaData WiFi Firmware (Latest) For all instruments before D19350562 (Click link to download)
This includes version 1.2.4 of the firmware which:
You can view the current readings, settings and reference information of all your thermometers. Warning indicators will appear if there is a problem with any instrument, or if any sensor reading has reached the alarm levels set in ThermaData Studio.
For each thermometer, you can opt to receive push notifications when an alarm condition has been detected.
TD Link is a view-only app, that cannot be used to alter instrument settings.
This app couples with the ThermaData Studio app, to enable the user to receive alerts from their ThermaData WiFi wireless thermometers on their phones and tablets..