UKAS temperature calibration laboratory

ETI's in-house UKAS accredited calibration laboratory for temperature has a wide measurement range of -50 to 200°C with a best measurement capability of 0.04°C. The laboratory can also measure resistance up to 16MΩ (i.e. resistance decade boxes and PT100/RTD temperature simulators) and DC voltage 0 to 200 mV (i.e. thermocouple simulators and calibrators). Original UKAS Certificates provide proof that instruments and probes have been calibrated against nationally approved standards.

· 1 to 5-point UKAS Certificates

• · certified uncertainties from ±0.04°C

· thermometer temperature range -50°C to 200°C

· rapid turnaround & flexible certification

 
*UKAS Certificates not supplied with instrument will require the relevant instrument to be sent to us for certification. After placing order you will be contacted to arrange. Usual turn-around time is within 7 days.

thermometers & probes

Each UKAS Certificate indicates the deviations from standards at various check points -18, 0, 40, 70 and 100°C with a guaranteed uncertainty, dependant on the probe type, see best measurement capability table below.

test caps & simulators

Each UKAS Certificate indicates the deviations from standards at specific check points (-18, 0, 3, 70 and 100°C) to an uncertainty of ±0.1°C (resistance) or ±0.15°C (thermocouple).

data-loggers

Each certificate indicates the deviations from standards at three check points (-18, 0, and 40°C) to an uncertainty of ±0.04°C. The results are recorded and include each data logger's serial number, type and model.

For temperature calibration prices and procedure and to obtain a pre-order quotation plese click here.