Stainless Steel Pipework Thermometer - 60mm dial

Exactly as expected and described. Delivered very promptly. No problems, so excellent service. My thanks.

Easy to use. Did what I wanted.

A well made good quality thermometer.
Slightly more expensive than some on the Interweb but worth the extra money.
Excellent service again from ETI - it arrived the day after the order was placed.

Does what it says on the tin…..
Good clear dial, rotatable so you can change the viewing angle.
My only reservation is that the springs that come with it are a bit small for a 1” pipe - the end loop on my spring stretched open when I tried to get it round, and in the end I had to make a little extension loop of copper wire to shorten the length of stretch needed. Works fine now.

Good quality

Bought to help balance radiators. The thermometers are well made and well calibrated. Good value and good service. Would recommend.

Very useful on central heating pipes to show flow and return temperatures

Clear dial. Sensitive. Spring works but a bit fiddly

Great product and good quality

I have a mixing valve between my hot tank, heated in the summer by solar panels, and my pump. I bought this to keep a check on the temperature of the mixed cooler water. It is easy to fit the thermometer to the 22mm pipe. It takes some minutes for the correct temperature to show on the dial so it should be checked after running a shower or filling bath. Measuring a constant flow in a heating pipe should be easier. A smaller spring for 15mm piping is also provided. A good buy.

Works well, fairly accurate. 2 x size of spring clip included which is a great help.

Simple to install, does the job

Has proved really useful in diagnosing problems in my central heating, but I feel the flat contact surface for the temperature measurement does not suit round pipes very well. Why not make some 15mm and 22 mm diameter adapters to go with the gauge?

excellent service next day delivery.

Just the job.
Ian

Gauges work as they should. I have micro bore 8mm pipe. So the spring method of attachment will not work. Hopefully I will find a suitable method of attachment. Maybe a smaller spring would do. Overall though the guages are good for the job.

A little fiddly to fasten the spring as the tags from punching out the spring holes get in the way. But it does the job of keeping an eye on my thermal store and is excellent value

Fitted neatly on the water tank outlet pipe to allow me to monitor solar heating system. Clear dial and ease of fitting ensured optimum reading position could be obtained.

Excellent item put on my return feed on condensing boiler to make sure it was below 53degrees to get best economy

Does the job as required, fits flat surface of valve nut marginally better than 15mm pipe, good value.