Data loggers Mk1 ThermaData logger blind recording thermometers

Buyer Rating: 5 out of 5 from 3 Reviews
ETI |  New

Mk1 ThermaData® logger blind recording thermometers

  • visual display shows if limits exceeded
  • customised high/low alarm facility
  • range -40 to 85°C
  • UKAS 3 point certificate available
  • FREE software to download
  • requires purchase of a USB lead 

More details

in stock

Add Matched Accessories

Add data logger accessories

£21.60 ex VAT

  No tax

£27.00 ex VAT

-20%


The ThermaData® data logger Mk1 is a cost effective, self-contained temperature data-logger or blind recording thermometer that is designed to record the temperature of the surrounding environment. The ThermaData® data logger is housed in a water-resistant polyethylene case and incorporates two LED status indicators.

The ThermaData Studio software allows the user to programme the logging sample/interval rate (1 to 255 minutes), the real-time clock, °C/°F, delayed start (maximum 23 hours, 59 minutes) or push-button start and a 12-character user ID. The software also incorporates a password protected calibration adjustment feature that allows the user to check the calibration of loggers and make minor adjustments 0.5 °C (±3 °C).

By selecting continuous logging in the software options, it is possible to start the ThermaData® logger only once and never have to reset its parameters again, even if downloaded regularly. Unlike most low cost loggers, the ThermaData® logger will continue recording during and after downloading the data.

The user can also set within the software, high and low alarm values for a specific application. A button push will allow a simple visual inspection of the unit to show if either of these limits has been exceeded. An illuminated red LED will warn the user that the alarm limits have been exceeded (reject) or an illuminated green LED will advise the user that the alarm limits have not been exceeded (accept)

ThermaData Studio Software:-
The ThermaData Studio software is supplied as a FREE download.  The ThermaData® logger is connected to a PC via a USB port lead. By clicking on the relevant icon the data can be downloaded and displayed either as a graph, table or summary. The information can then be analysed by zooming in, saving as a 'studio file' or exporting to other software packages.

colour-coded data loggers
The ThermaData® loggers are available in a variety of coloured cases; blue, white, yellow, green, red, brown and black. The colour-coded cases help to prevent cross-contamination by allowing the user to allocate a colour to a specific product or application. For example, in the food industry, green may be used for salads, blue for fish and red for raw meats etc.

Other applications include different coloured loggers for easy identification in, eg, the building and construction industry where loggers can often blend in with the environment. *N.B. this datalogger requires purchase of a USB lead.

range:-40 to 85°C
resolution:0.5°C
accuracy:±1°C (±0.5°C with calibration utility)
memory:2048 readings
sample rate:1 to 255 minutes
battery:3.6 volt half AA lithium
battery life:3 years minimum
display: 2 LED's
dimensions:55 x 25mm
weight:40 grams
case material: plastic
country of manufacture: United Kingdom
guarantee: two years
water/dust resistance: water resistant
measurement scale: Celsius
OS:Windows

ThermaData® Studio Software Download Links:

ThermaData Studio v4.0.1 (Main Desktop Download for Windows 7,8 & 10)

New release adds:

  • A new graph with significantly improved zooming/pan/responsiveness
  • Enhanced import/export of data
  • 'Search ThermaData Studio' for easier access to functionality
  • Improved offline functionality 
  • Bug fixes
  • Easier access to ETI Technical support 

Windows Installation Instructions:
1) Please unzip the folder by right-clicking on the folder and pressing 'Extract All'
2) Once the folder has been extracted select the 'setup.exe' file
3) Run through the setup wizard by clicking 'Next'
4) Once the installation has complete, select the ThermaData Studio icon on your desktop
5) A splash screen will open along with a window requesting you select the instruments that you would like to enable. Untick all the instruments you do not have, leaving only the instruments you have purchased ticked. Click 'Ok'
6) Once this has been completed ThermaData Studio will open ready for you to use. 

If you require any information on how to use ThermaData Studio, please click on the blue '?' icon in the top right corner
and this will open a .pdf help guide. Alternatively, contact us on 01903 202151 or email technical@etiltd.co.uk

ThermaData Studio v4.0.1 (Windows 10 App download)

Both powerful and sophisticated, yet user-friendly, the ThermaData Studio software enables temperature data to be organised and analysed to provide management information.

The ThermaData Studio software has the ability to display up to 32 traces on a graph, the trace colours are user selectable. All files can be viewed as thumbnail icons for easy identification.

The software allows the user to programme the logging sample/interval rate (0.1 to 330 minutes), communication interval (sync) with PC, real-time clock, °C or °F and a manual start option. It is also possible to include a user ID for each logger.

The ThermaData Studio software is supplied as a FREE download. Please note: when initially ordering non WiFi loggers, it is necessary to order at least one ThermaData logger cradle.

ThermaData WiFi loggers Use the unique ID of each logger to create a secure connection between the logger and ThermaData Studio software, that can be accessed and viewed anytime and anywhere with an internet connection. Each logger communicates directly to the WiFi router at set intervals to push data through the internet into ThermaData Studio. The information is available to be analysed and exported into a report format.

For a walk-through guide to setting up ThermaData Studio software please click here.





ThermaData® WiFi Firmware Update v1.2.4.0:

ThermaData WiFi Firmware (Latest) For all instruments before D19350562 (Click link to download)

This includes version 1.2.4 of the firmware which:

  • Improves connectivity to many WiFi networks
  • Adds ability to connect to WiFi channels 12 & 13
  • Fixes a number of identified lock-up scenarios

 


TD Link iOS

TDLink App By signing in to the TD Link app, you can view the status of all the ThermaData wireless thermometer units associated with ThermaData Studio, wherever the internet is available.

You can view the current readings, settings and reference information of all your thermometers. Warning indicators will appear if there is a problem with any instrument, or if any sensor reading has reached the alarm levels set in ThermaData Studio.

For each thermometer, you can opt to receive push notifications when an alarm condition has been detected.

TD Link is a view-only app, that cannot be used to alter instrument settings.

     

 

  



ThermaData Alert - Android Only

TDLink App

This app couples with the ThermaData Studio app, to enable the user to receive alerts from their ThermaData WiFi wireless thermometers on their phones and tablets..

     

 

  


ThermaData QSG

Quickstart guide for ThermaData loggers Mk1 & Mk2

Download (411.99k)

293-001/701 C of C

293-001/701 Mk1 Dataloggers certificate of conformity

Download (231.71k)

9 RELATED PRODUCTS

Similar products from our range...
Product successfully added to the product comparison!