The ChefAlarm is a professional cooking thermometer and count up/down timer with interchangeable NTC thermistor probes.
Warning: Last items in stock!
The ChefAlarm is a professional cooking thermometer and count up/down timer which displays the countdown/up time, current temperature and simultaneously displays both the high/low alarms and max/min temperatures.
The timer is fully programmable, allowing the user to set the count up/down time to/from 99 hours, and 59 minutes. The unit incorporates a large, easy to read LCD display with user selectable backlight and a loud audible alarm with adjustable volume to 92dB - ideal for busy professional kitchens.
The ChefAlarm also includes a calibration function allowing the user to fine-tune the accuracy of the thermometer (±2.2 °C). The unit is housed in a water resistant casing and is designed to either sit on a worktop or attach to an appliance using the magnetic pads at the rear of the instrument.
Available in three colours, each ChefAlarm is supplied in a padded zip wallet complete with a penetration probe (810-071). Click the Probes or accessories tab above for probe specification.
|range:||-50 to 300°C|
|accuracy:||±1°C (-20 to 120°C), ±2°C between –50 to -20 and 120 to 200°C, ±3°C between 200 to 300°C|
|battery:||2 x 1.5 volt AAA|
|battery life:||5000 hours|
|case material:||ABS plastic|
|water/dust resistance:||water resistant|
|timer:||count up & count down|
DOT / ChefAlarm penetration probemade specifically for the DOT & ChefAlarm reduced tip probe for faster readings supplied with 1.2 metre braided lead
mini needle probe for DOT / ChefAlarmeven faster response time - 5 seconds ideal for Sous Vide cooking designed specifically for the ChefAlarm Ø1.6 x 90 mm
penetration probe for DOT or ChefAlarm thermometersreduced tip for faster response continuous monitoring in ovens or similar. designed specifically for the DOT & ChefAlarm
DOT / ChefAlarm oven probe & clipmade specifically for the DOT & ChefAlarm thermometer incorporates clip to attach to oven shelf supplied with 1.2 metre braided lead
These probes have been designed to work solely with the ChefAlarm professional cooking thermometer and timer. Both come with 2.5mm jack plug connector and incorporate a NTC thermistor sensor.
NTC thermistor probe with 2.5 mm jack plug (810-071)
This reduced tip, fast response, stainless steel, penetration probe is moisture-resistant and ideal for continuous monitoring in ovens or similar. Supplied with a 1.2 metre stainless steel braided lead. Probe temperature range -50 to 300 °C.
Mini needle probe (810-072)
This miniature, stainless steel needle probe is moisture-resistant and ideal for Sous Vide cooking. Supplied with a 1.2 metre silicone lead. Response time in five seconds. Probe temperature range -50 to 300 °C.
NTC thermistor penetration probe (810-078 & 810-075)
This stainless steel, reduced tip, fast response penetration probe is moisture-resistant and ideal for continuous monitoring in ovens or similar. Supplied with a 1.2 metre stainless steel braided lead. Probe temperature range -50 to 300 °C. Two lengths available, 114 or 305mm
Oven probe with clip (810-076)
This stainless steel oven probe is ideal for monitoring ambient air temperatures. Using the clip, simply attach to an oven rack or shelf. Supplied with a 1.2 metre stainless stell, braided lead. Probe temperature range -50 to 300 °C.
max min thermometer with internal temperature...
Comfort thermometer with max/min temperature &...
IR-Micro pocket infrared thermometer.range...
Temperature Guide Fridge Magnet - magnetic meat...